Important considerations when choosing Dewert Lift Chair Clevis Mount
The 8240 clevis mount fastens the base of the MBZ and MB1 Dewert motors to the frame of the chair it is held on to the motor with four screws. It will also work with the newer FBS motors that have the clevis mount system
Do you know what is the superiority of this Dewert Lift Chair Clevis Mount?
This was the most common Dewert actuator used a few years ago on standard lift chairs made by Pride and Mega Motion. This actuator has one lead, a male two 2 prong flat blade/round blade connector that plugs into an extension cord coming from a transformer that sits behind the chair MBZ or to a transformer that mounts on the side of the actuator MB1 PLEASE NOTE: there are several different Megamat actuators that have been used on lift chairs, and this fits most of them that have only one motor in the chair. If your chair has two motors, this one may or may not be the correct one. Also, if your motor is not even trying to run, it is very doubtful that the motor is the problem, as these motors hardly ever go out when they are dead silent… Usually, the problem is in either the hand control or the transformer. If any questions at all, please let us know before you place your order. We realize that nearly all our competitors state that you must give them the serial of the chair before they can help. In reality, we hardly ever need the serial to get the most common parts for a chair. If you read and follow the description above, and the pictures look like what you have, then you can be assured that the part will work for your chair. We do this every day, all day long, and have gotten pretty good at determining what will work for the chair you have.
Customer reviewsjust like the other two did
Dewart has you by the balls on these, so bend over any shell out 60 for a 10 plastic part that should be a 15 metal part because this one will break after a year of use, just like the other two did.