What should you look for when buying 100 Blackout Window Shade?
ATTENTION PLEASE READ: We can customize window shades up to an 1/16th inch. Order the closest size and then we will send email within 24 hours to confirm window information, we also can send you artwork depends on your window size if you need, please give us confirmation in 48 hours. If we do not get any reply, we will make the size without any adjustment, the shade width is for the overall width from bracket to bracket, fabric will be about 1.2" less than the overall shade width. DESCRIPTION:" Slender Window" collection patterned window shades designed for slender window only. Block 100 light and 100 UV ray, energy saving insulates againest heat and cold, noise is reduced and provide privacy. Upgraded metal cord loop make shades down up. Our shade are good for both inside mount and outside mount just depneds on the size you ordered. INSIDE MOUNT:Min depth for inside mount is 2.5", shade width is at least 1/4" less than widnow width, and shade length should be the same as window height. Take example, if window inside is 38.5" wide by 16" height, shade width should be 38.25" 38.5"-1/4" , shade length shoude be 16", please choose closest size 38" W x 17"L to place order then reply us email telling us two information:1 window size 38.5" wide by 16" height. 2 Inside mounting. We will change the size to 38.25"W x 16"L. OUTSIDE MOUNT: Shade width need to be 3-6" wider than window width, shade length need to be 8-10" longer than window length for better coverage. Take example, if window outside is 38.5" wide by 16" height, shade width should be at least 41.5" 38.5" 3" ,shade length should be at least 24" 16" 8" . Choose closest size 42" W x 21"L to place order reply us email telling us two information:1 window size 38.5" wide by 16" long. 2 Outside mounting. We will change the size to 41"W x 24"L. MADE-TO-ORDER: We can custom size to suit your windows. Feel free to contact to make sure shades match window perfectly. If you are not sure about size and color, please order one blind to test, depending on the weight and distance, a return can be costly. PROJECT SUCCESS GUARANTEED: When you shop with us,we guarantee your project will be a success. No matter if you made a mistake or there are other issues, you will be covered. Cell Phone: 929 336-2336
Is this what you need when you buy 100 Blackout Window Shade?
MOUNT TYPES: Inside mounted shades will have a deduction taken of approximately 1/4″ to ensure a proper fit inside the window frame.Inside mounted shades require a minimum frame depth of 2.5inch for secure installation. If your window frame depth is less than 2.5inch please select outside mount.Outside mounted shades should be ordered with the exact width of the area you wish to cover. Outside mounts are often used when there is not sufficient frame depth for inside mounting.Our shades come with all mounting hardware, and mounting hardware for both inside mount and outside mountINSIDE MOUNT MEASUREMENT: Step 1.Measure the inside frame width at three locations-the top,middle,and bottom. Record the smallest of the 3 measurements and use that number deduct 1/4inch as your inside width when ordering.Step 2. Measure the height at 3 locations-the left,middle,and right side. Record the smallest of the 3 measurements and use the number as your inside width when ordering.OUTSIDE MOUNT MEASUREMENT: Step 1. Measure the outside frame width adding 6-10inch to be the outside mount width.Step 2. Measure the outside frame length adding 5-10inch to be the outside mount length. The overlap it recommended to allow appropriate coverage and avoid any light gaps.Type: Printing window blinds.Feature: 100 Blackout Material: PolyesterInstallation: All Mounting Hardware Included.
Customer reviewsBeautifully made and packaged well, but not meant as Black-Out.
This was very well packaged, came with no damage from China to the US. It was easy to install and looks wonderful, as pictured. The only reason I give it 4 instead of 5 stars is because with the way it gets assembled, there s no way to use it as a blackout. There is a 3/4 gap at the top of the mechanism and a 1/2 gap along both sides so light cones right through.